How do I apply the Miracle Mould Removal Gel?Updated 3 months ago

Our human friendly formula and easy applicator means there is no need to wear gloves or a mask while using this product. Do not touch the gel directly with your hands.

• Make sure the area is well ventilated before use, keep the surface dry and clean.
• Remove the foil covering the cap before attaching the nozzle. Twist off the nozzle cap before use.
• Squeeze and spread the product evenly across the affected area and leave the gel for 3-5 hours
• Wipe with a damp cloth or rinse with water to remove the mould and any gel residue

You may need to treat the area again and use an abrasive pad to assist in removing stubborn mould.

WARNING:

If medical advice is needed, have the product container or label on hand. Do not ingest. Keep out of reach of children and pets. Avoid contact with the skin and eyes. Do not inhale the vapours for prolonged periods or repeatedly. Avoid contact with heat, sparks, flame and other ignition sources.If contact with eyes occurs, wash out thoroughly with water. Contact medical help if irritation persists.

Additional information is listed in the Material Safety Data Sheet (MSDS) available at glassguard.com/msds

In an emergency contact 000 or the poisons helpline at 13 11 26 (AU) / 1-800-222-1222 (USA) / 1-844-764-7669 (CA) / NHS24 on 111

https://glassguard.co.nz/products/miracle-mould